Samsung OfficeServ 7070 System Description Download

Page: 62 / 95

CHAPTER 4.

Ошибка! Используйте вкладку "Главная" для применения

제목

1 к тексту, который должен здесь

отображаться.

4-4

4.2.14 Do Not Disturb (DND)

All calls received to the SIP phone which then enables the DND function are disconnected.

4.2.15 Call Reservation

When the user makes a call and the receiving phone is busy, the phone can be reserved.

Then when the busy phone is released, the call the user reserved can proceed. Both users’

phones will ring and the call is connected when both users respond.

4.3 VMS Function

Because the Voice Messaging System (VMS) of the OfficeServ 7070 is embedded in

software, no physical interface is required. Therefore, this creates an advantage in price.

4.3.1 System Features

Caller ID Compatible

Caller ID Compatible If you subscribe to Central Office based Caller ID, OfficeServ 7070

Voice Mail is compatible. The Caller ID data appearing on keysets is also saved in your

voice mail box for each message you receive. This can be used for call back or simply to

identify the caller.

Flexible Numbering Plan

An organization can assign an extension, a mailbox, or an announcement to any

identification number from one to ten digits. All of these resources can share the same

identification numbering plan without conflict. For example, an organization can have, in

one OfficeServ 7070 Voice Mail System, an extension numbered 123, a mailbox numbered

123 and an announcement numbered 123. In addition, OfficeServ 7070 Voice Mail can

distinguish between variable length identification numbers beginning with the same digit,

such as extension number 1, or 12, or 1234567890.

Keyset Display and Soft Key Support

If you have a display keyset the number of new messages will be displayed on it.

The display will also echo many of the options available. You will be able to negotiate

through the OfficeServ 7070 Voice Mail menus using the keyset display and the soft keys

below the display to respond to the prompts.

MOH Supply

Music or announcements may be recorded in the OfficeServ 7070 Voice Mail memory and

used by the phone system for Music On Hold. The recorded announcement or music will

play in a continuous loop and may be used to provide custom on hold announcements or

promotional messages.

Summary of Contents for OfficeServ 7070
































































































Search results

Summary of Contents for OfficeServ 7070

Reviews:

Related manuals for OfficeServ 7070

Brands by name

Popular brands

Samsung OfficeServ 7070, System Description

Search results

Summary of Contents for OfficeServ 7070

Reviews:

Related manuals for OfficeServ 7070

Brands by name

Popular brands