Samsung OfficeServ 7070 System Description Download

Page: 17 / 95

OfficeServ 7070 System Description

2-1

CHAPTER 2.

Hardware of OfficeServ

7070

This chapter introduces the hardware features, cabinet configuration, and board functions

and configuration of OfficeServ 7070 system. In addition, this chapter describes terminals,

wireless LAN equipment, and additional equipment available in OfficeServ 7070 system.

2.1 Features of Hardware

The H/W of OfficeServ 7070 has the following features:

Reliability

The materials and parts used for OfficeServ 7070 hardware are robust and satisfy the

mechanical and electric features required for communication systems.



The cabinet of OfficeServ 7070 complies with the industrial standards and is molded

plastics with flame retardant materials.



OfficeServ 7070 hardware does not generate poisonous or corrosive gas, which might

be harmful for human bodies or affect the system operation.



OfficeServ 7070 hardware has a failure-tolerance to protect the system from the

damage caused by over-voltage.



OfficeServ 7070 hardware is designed considering EMI characteristics.

Maintenance

OfficeServ 7070 hardware is designed to be maintained with ease and safety.



The OfficeServ 7070 is designed to be suitable for wall mounting.



Because the ports connected to the external are located in the front panel, the installation

and maintenance engineers can connect the cables conveniently.



There is a Light Emitting Diode (LED) at the front of each module indicating its

operation status and fault status, helping the operator to identify the status of the

system easily.



The electronic devices are designed not to be damaged by the external environment

during installation or maintenance.

Summary of Contents for OfficeServ 7070
































































































Search results

Summary of Contents for OfficeServ 7070

Reviews:

Related manuals for OfficeServ 7070

Brands by name

Popular brands

Samsung OfficeServ 7070, System Description

Search results

Summary of Contents for OfficeServ 7070

Reviews:

Related manuals for OfficeServ 7070

Brands by name

Popular brands