Samsung OfficeServ 7070 System Description Download | Manualshive

Page: 2 / 95

background image

COPYRIGHT

This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright.

No information contained herein may be copied, translated, transcribed or duplicated for any commercial

purposes or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics

Co., Ltd.

TRADEMARKS

is the trademark of SAMSUNG Electronics Co., Ltd.

In addition, p

roduct names mentioned in this document may be trademarks and/or registered trademarks of

their respective companies.

WEEE SYMBOL INFORMATION

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product

should not be mixed with other commercial wastes for disposal.

EEE Yönetmeliğine Uygundur (This EEE is compliant with RoHS)

This manual should be read and used as a guideline for properly installing and operating the product.

This manual may be changed for the system improvement, standardization and other technical reasons without prior
notice.

If you need updated manuals or have any questions concerning the contents of the manuals, contact our

Document

Center

at the following address or Web site:

Address: Document Center 2nd Floor Jeong-bo-tong-sin-dong. Dong-Suwon P.O. Box 105, 416, Maetan-3dong

Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 442-600

Homepage: http://www.samsungdocs.com

© 2009 SAMSUNG Electronics Co., Ltd. All rights reserved.

«
1
2
3
4
...
»

Summary of Contents for OfficeServ 7070
































































































Reviews:

No comments

Related manuals for OfficeServ 7070

Brand: Panasonic Pages: 168

Brand: Panasonic Pages: 396

Brand: Panasonic Pages: 388

Brand: Nortel Pages: 40

Brand: IKE Pages: 37

Brand: LG-Nortel Pages: 581

Brand: Orchid Telecom Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands