OfficeServ 7030 System Description
© SAMSUNG Electronics Co., Ltd.
2-5
Checking MEM LED before power off
Don’t turn off the power during blinking MEM LED. It may cause malfunction of
system. If you want to turn off power, turn off power switch after dismounting
MEM with ‘Key MMC 817 MEM UMOUNT’.
Checking LAN cable during lighting LAN LED on
LAN LED lights on in case of being installed EPM board although LAN cable is
not connected. Check if LAN cable is connected during lighting LAN LED on.
Figure 2.3 Right side view of OfficeServ 7030 cabinet
The descriptions about each part on the right of the cabinet are listed in the table below.
Table 2.3 Parts on the right panel of the cabinet
Part
Function
C.O 1-4
Trunk ports
LINK1-3
Ports that connect the Base cabinet with the expansion cabinet
EXT1-8
Station ports for subscribers (ex. analog phone, digital phone, LAN)
Reset
Button for resetting the system
SLT1, 2
Station ports for analog phones
MISC
Ports that connect external music sources, paging device, loud bell,
common bell, or door bell
LAN
LAN port
