Samsung OfficeServ 7030, Installation Manual

Page: 79 / 105

CHAPTER 6. Connecting the Stations and Additional Equipment
6.1.4.1 Connecting Boards to the Ethernet
4LM/LAN port of the base board can be connected to the Ethernet with an Ethernet cable.
 4LM Board-Line Ports (P1~P4)

Base Board-LAN Port
Pin No. 1 2 3 4 5 6 7 8
Function Tx+ Tx- Rx+ - - Rx- - -
Figure 6.6 RJ-45 Port of the Ethernet Connection Board
6.1.5 Connecting to a Door Phone and Door Lock
Connect a door phone and a door lock to the OfficeServ 7030 system with a Door Phone
Interface Module (DPIM). Connect a pair of #24 AWG or #26 AWG cables to the LINE
port of the DPIM and the ports of the OfficeServ 7030 system's 4DM board.
Connecting to the 4DM/2DM Boards
Pin No. 1 2 3 4 5 6 7 8
Function - - - DLI TIP DLI
RING
- - -
Figure 6.7 RJ-45 Port of the 4DM/2DM Boards (for Door Phone)
1) Connect the Door port of the DPIM and the line port of the DOOR BOX.
2) When using an automatic door lock, connect the Lock port of the DPIM and the door
phone contact point to the door lock.
The door lock contact point is designed to control the low-voltage relay and is operated
6 © SAMSUNG Electronics Co., Ltd.
P1~P4 Port
/LAN Port
(RJ-45)
P1~ P4 Port/
P1 ~P2 Port
(RJ-45)