Samsung OfficeServ 7030, Installation Manual

Page: 94 / 105

OfficeServ 7030 Installation Manual
CHAPTER 7. Starting the System
This chapter describes the items to check before starting the OfficeServ 7030 system, as
well as the procedure for starting the system and the procedure for testing whether the
system is operating normally after startup.
7.1 Pre-Check
This section describes the items to check before starting the OfficeServ 7030 system.
7.1.1 Environment

Temperature
Check if the room temperature is between 0
°
C and 40 o C. If the room temperature is
above or below the operational temperature, install a heating/cooling device to
maintain the operational temperature.

Humidity
Check if the humidity of the room is between 10% and 90%. Take special caution
since the humidity affects the electric components and the connectors of the system.
 Direct Sunlight and Dust
The room where the OfficeServ 7030 system is installed should be protected from
direct sunlight and should have ventilation systems to prevent the system from
malfunctioning due to dusts.
© SAMSUNG Electronics Co., Ltd. 1