Samsung NP-X11C User Manual Download Page 160

Page: 160 / 178

Troubleshooting 141

The date of the restore point is displayed in bold font.

Confirm the selected restore point and click

Next

. System Restore shuts down

Windows, and starts the restoration processes.

After the restoration is complete, Windows restarts. In the [System Restore com-
pleted] dialog, click

.Your computer has been restored to the selected restore

point.

Undoing the last restoration

The procedures to undo a restoration are described below.

Click

Start > All Programs > Accessories > System Tools > System Restore

Select "Undo my last restoration", and then click

Next

Confirm the restoration information to undo, and than click

Next

. System Restore

shuts down Windows and starts undoing the restoration.

After the undo restoration is complete, Windows restarts. In the [Undo the last res-
toration completed] dialog, click

.Your computer has been restored to the point

prior to the last restoration.

Summary of Contents for NP-X11C



















































































































































































Search results

Summary of Contents for NP-X11C

Reviews:

Related manuals for NP-X11C

Brands by name

Popular brands

Samsung NP-X11C, User Manual

Search results

Summary of Contents for NP-X11C

Reviews:

Related manuals for NP-X11C

Brands by name

Popular brands