Troubleshooting 119
Q6
The playback screen of a DVD title or an MPEG file is only displayed on the
LCD. (This only applies to nVidia graphics card.)
A
Video is displayed on a single display device by default, when LCD and CRT are
selected simultaneously.
z
Right-click over the Desktop and select Properties from the pop-up menu.
x
In the [Display Properties] window, select the Settings tab > Advanced > Ge-
Force Go xxxx tab.
c
Select the Full Screen Video menu> Full Screen Video Control item, set the
Full Screen Device to 'Auxiliary Display' and then click the Apply button.
Then you can view video on both the LCD and CRT display devices.
Q7
The Taskbar on the bottom of the screen does not appear when a projector
is used as the display device.
A
A This may happen, even though SXGA+ LCD supports the 1400
x
1050 mode,
the projector does not support that mode. In this case change the resolution to
1024x768 (recommended) on your computer.
Q8
Switching the MS-DOS command prompt to full screen mode or Windows
mode by pressing the <Alt>+<Enter> keys does not operate properly.
A
Pressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key in-
put to be recognized as multiple key inputs depending on the keyboard input rec-
ognition time. In this case, the MS-DOS command prompt is repeatedly switched
to full screen and then to Windows several times. Please press the <Alt>+<En-
ter> keys more quickly, or press the <Alt>+<Enter> keys using the system key-
board.
Q9
Pressing the shortcut key on the keyboard does not show the Samsung Dis-
play Manager icon.
A
The Samsung Display Manager icon only appears when both the Magic Key-
board and the Samsung Display Manager program are installed.
Q10 I cannot set up Dual View properly. (For Intel Graphics only.)
A
This may happen when Clone mode is selected for an external monitor.
Press the
<Fn>
+
<F4>
key combination to select LCD and try to set up Dual
View again.
