Samsung ML 7000 User Manual Download Page 36

Page: 36 / 143

Using Your Printer

With Windows 3.1

1. From

Program Manager

windows, double-click on the

Control Panel

icon within the Main Program group.

2. Double click on the

printers

icon within the

Control Panel

Windows.

3. In the Installed Printers list, click on

Samsung 7000 Series

(PCLXL or

PCL 5e) if it is not already highlighted.

4. Click on the

Setup

button.

5. Select the required options.

The OFFLINE message appears on
the display and the printer is off-line.

ulltt

Changes made from a software application override the user
default setting made from the printer operator panel.

General

You can print a
test page and
view the driver
information.

See page 37

Sharing

You can share the
printer.

See page 38

Details

You can select the
printer port and
spool setting.

See page 40

See page 36

See page 35

See page 39

Summary of Contents for ML 7000
















































































































































Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands

Samsung ML 7000, User Manual

Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands