Samsung ML 7000 User Manual Download Page 29

Page: 29 / 143

Setting Up your Printer

In case of Win 95

1. Make sure the printer is plugged and connected to your computer.

2. Turn on the printer and start Windows on your PC.

3. Windows recognizes the printer, and ÔNew Hardware FoundÕ

dialogue box is displayed.

4. Click on the OK button.

5. Insert CD into the CD-ROM drive, and click on the Browse button.

6. Select the CD-ROM drive, then click on the OK button.

7. Follow step2 through 8 on page 25 to complete the installation.

In case of Win 98

1. Make sure the printer is plugged and connected to your computer.

2. Turn on the printer and start Windows on your PC.

3. Windows recognizes the printer, and ÔAdd New Hardware WizardÕ

dialogue box is displayed.

4. Select search for the best driver for your device(Recommended),

then click on the NEXT button.

5. Insert CD into the CD-ROM drive, then click on the Browse button.

6. Select the CD-ROM drive, then click on the OK button.

7. Follow step2 through 8 on page 25 to complete the installation.

In case of Plug & Play

To Install Shared Win 95/98 Printer Driver from
NT Server to Client PC

1. Select

Sharing

Properties

of the printer driver.

2. Select

Windows 95

Alternate Drivers

3. Type D:(or E:)\ PCLDRV\PCLXL\ENGLISH\WIN95_98\ML-7000

4. Install the network printer in the client PC.

Summary of Contents for ML 7000
















































































































































Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands

Samsung ML 7000, User Manual

Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands