Samsung ML 7000 User Manual Download Page 24

Page: 24 / 143

Setting Up your Printer

Testing the Printer

Print a configuration page to make sure the printer is operating correctly.

1. Make sure the printer is plugged in and the

READY status message appears on the
display.

RE ADY

0F F L NE

TE S T

ME NU

SE L FTE ST

2. Press On Line.

3. Press Menu > or < Menu to enter the menus.

4. Press Menu > or < Menu one or more times

until the TEST MENU message is displayed.

5. Press Item> or <Item one or more times

until the SELFTEST message is displayed.

6. Press Enter to print.

The OFFLINE message appears on
the display and the printer is off-line.

ulltt

●

The message ÔPRINTING PCL6Õ appears and remains on

the display until the page prints.

●

The printer returns to the Ready state after printing.

ulltt

Summary of Contents for ML 7000
















































































































































Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands

Samsung ML 7000, User Manual

Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands