Samsung ML 7000 User Manual Download

Page: 26 / 143

Setting Up your Printer

Installing the Driver

Hardware Requirements

To install and run the PCL printer driver, you must have the following
minimum hardware configuration.

●

PC-compatible 486 microcomputer or better

●

8MB of RAM for Windows 3.1 and 3.11 (16MB recommended for some

applications) or 16MB for Windows 95/98, Windows NT 4.0

●

10MB available hard-disk space.

●

CD-ROM Drive

Software Requirements

To install and run the printer driver, you must have one of the following
minimum software configuration :

●

Windows 3.1 or Windows for Workgroups (Windows 3.11)

●

Windows 95, Windows 98, Windows NT 4.0

●

Novell NetWare Version 3.x or 4.x (If the Network card is installed)

●

Above the Macintosh System 7.x (To print the document from

Macintosh)

Install Procedure

To install the printer driver on your hard disk, make backup copies
of the print driver CD. Keep the original CD in a safe place and use the
copies.

If you do not have access to a CD-ROM drive, contact your local
dealer and request the printer driver diskettes.

Summary of Contents for ML 7000
















































































































































Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands

Samsung ML 7000, User Manual

Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands