Samsung ML 7000 User Manual Download Page 28

Page: 28 / 143

Setting Up your Printer

5. Select the desired language, and then click on the

NEXT

button in the Font Navigator dialogue box.

6. Follow the instructions on the screen.

7. Select the directory to install Font Navigator.

Click on the

Finish

button.

8. Click on the

Yes

button, when asked to restart windows.

If the printer driver is installed together
with SyncThru, the SyncThru installation
dialogue box is displayed.

Windows is restarted. The installation of the
printer driver and Font Navigator is completed.

ulltt

If windows does not run the CD-ROM

1. Insert the compact disk into the CD-ROM drive.

2. Select Start-Run from the windows task bar.

3. Type d:(or e:)\ Setup.exe on the command line,

then click on the OK button.

4. Follow the instructions on the screen.

Summary of Contents for ML 7000
















































































































































Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands

Samsung ML 7000, User Manual

Search results

Summary of Contents for ML 7000

Reviews:

Related manuals for ML 7000

Brands by name

Popular brands