Samsung ML-5200A, User Manual

Page: 48 / 81

2 .23
Operating your printer
The remote control panel dialog box includes 7 tabs.
PRINTER
• Timeout
Determines the amount of time in seconds the printer waits before
printing the last page of a print job that does not end with a
command to print the page.
• Power save
Determines the length of time the printer waits after a job is printed
before it goes to a reduced power state. If the printer is used
constantly, select
OFF
which keeps the printer ready to print with
the minimum warm-up time. This uses more energy to keep the
printer warm and ready to print.
• Auto continue
Determines what action the printer should take when a manual feed
print job is sent to the printer and there is no paper in the manual
feeder. If set to
ON
, the printer will pick up the paper from the
automatic feeder after ten seconds. Otherwise, the printer will wait
for you to load paper in the manual feeder.
• Jam recovery
If paper jams as it exits to the output bin, the data on the jammed
page will be lost. If you set this feature to
ON
, the printer keeps the
image for a printed page until the printer signals that the page has
successfully exited the printer. The printer reprints all jammed
pages. With this feature
OFF
, the printer does not reprint a page
that has jammed.
• Econo mode
To get the most from your toner supply, set this mode to
ON
. With
this mode
ON
, print quality may be reduced.
PAGE
• Paper size
Sets the paper size.
• Copies
Sets the number of copies printed for each page.
• Orientation
Determines how the printing is oriented on the page.
• Paper type
Allows you to specify the type of print material installed in each
paper source.
02-Operating 3/2/00 9:36 AM Page 25