Samsung LA40F81BD Owner'S Instructions Manual Download Page 50

Page: 50 / 78

English - 5

Using the WISELINK Function

This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a

USB Mass Storage Class (MSC) device.

Press the

POWER

button on the remote control or front

panel.

Connect a USB device containing JPEG and/or MP3

files to the WISELINK jack (USB jack) on the side of the

TV.

Removing a USB Device
1

Press the

MENU

button to display the menu.

Press the ▲ or ▼ button to select

Guide

, then press the

ENTER/OK

button.

Press the

ENTER/OK

button to select

WISELINK

The photo or music files saved on the memory device are

listed.

Press the blue button and press the ▲ or ▼ button to

select

Safe Remove

and press the

ENTER/OK

button. The

Removing the device safe...

message appears and then

the

USB could be removed safe

message appears.

Remove the USB device from the TV.

➢



If you enter the WISELINK mode with no USB device

connected. “No external storage device found. Check

the connection status.” message will appear. In

this case, insert the USB device, exit the screen by

pressing the

WISELINK

button on the remote control

and enter the WISELINK screen again.



Photo and audio files must be named in English.

If not, the files can not be played. Change the file

names to English, French, or Spanish if necessary.



Folder or file names can not exceed 128 characters.

If exceeded, they won’t function.

When the files stored in

the USB is over 440MB, if you select

Delete All

the TV will be abnormal. You can delete it in the computer.



The file system only supports the FAT16/32.



Certain types of USB Digital camera and audio

devices may not be compatible with this TV.



WISELINK supports USB Mass Storage Class (MSC) devices only.



MSC is the device for mass storage class bulk-only transport. (e.g. thumb device, flash card

reader)



WISELINK only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage

Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers.



Before connecting your device to the TV, please back up your files to prevent them from damage

or loss of data. SAMSUNG is not responsible for any data file damage or data loss.



The USB hub is not supported and you cannot use a digital camera (PTP: Picture Transfer

Protocol) and USB storage device at the same time.



To remove a USB storage device from the TV or to turn it off (if available), exit WISELINK first for

a proper system operation.

Continued...

BN68-01314A-00Eng.indd 50

2007-07-26 ¿ÀÈÄ 11:40:53

WISELINK

Full Guide

Now&Next Guide

Default Guide

: Full Guide

Guide

Folder 1

2007/1/2

File 1.jpg

2007/1/2

File 2.jpg

2007/1/2

File 3.jpg

2007/1/2

File 4.jpg

2007/1/2

USB



Device



Zoom



Option

Photo

Information

Safe Remove

Removing the device safe...

TV Side Panel

USB Drive

Summary of Contents for LA40F81BD















































































Search results

Summary of Contents for LA40F81BD

Reviews:

Related manuals for LA40F81BD

Brands by name

Popular brands

Samsung LA40F81BD, Owner'S Instructions Manual

Search results

Summary of Contents for LA40F81BD

Reviews:

Related manuals for LA40F81BD

Brands by name

Popular brands