background image

setup screen

to make recording on the micro SD memory
1. 

Check the memory card’s <

free

> size and <

total

> size.

2. 

If there are sufficient free space, set the device to <

on

>. 

Otherwise, check the stored data and if you find them not important, then click  

<

format

> to format the Micro SD memory.

 

`

Some frames may be skipped if the micro SD memory card operates at the lower speed than 

recommended. 

For more details, refer to “

Recommended Micro SD/SDHC/SDXC Memory Card Specifications

”. 

(Page 10)

 

`

For a Micro SD memory card with a large capacity, the formatting will be slowed down accordingly.

 

`

The data traffic will increase when the camera is set to higher resolution, higher bit rate, and/or higher 

framerate. 

If there is too much data traffic, some frame may be skipped although it is stored in a full frame.

3. 

Specify the storage action.

 

Record profile : Shows recording profile’s codec type.

 

Overwrite : If the Micro SD memory is full, this will delete old data and store new 

data in replacement.

 

Pre-alarm duration : Specify the time point before the occurrence of the alarm; 

starting from the time point, the images will be transferred. You can specify up to 

5 seconds before the occurrence of the alarm.

 

Post-alarm duration : Specify the time point after the occurrence of the alarm; to 

the specified time point, the images will be transferred. You can specify up to 120 

seconds after the occurrence of the alarm.

 

Record file type : It specifies the file format of the recorded images.

 - STW : It is Samsung Techwin’s unique file format.

 - AVI : It is the conventional avi format.

 

Normal : Make recording at a certain frame rate.

 

Event : Set the recording type for a certain event that occurs.

4. 

Specify the <

normal record setup

>.

 

Always : Always save recorded video in the Micro SD memory card.

 

`

If set to Always, the activation time cannot be changed.

 

Only scheduled time : Records only on the specified time of the specified day of week.

 

[Clear ( 

 )] : Reset all settings.

5. 

When done, click [

apply (

 

 

)

].

92_

 setup screen

Summary of Contents for iPolis SNV-6084





















































































































































Reviews: