to set the video analysis rules
`
passing
1.
Set the type to <
passing, entering/
exiting
>.
2.
Set the event rule to <
virtual line
based rules
>.
3.
On the screen, click on preferred
starting and ending point of the virtual
line, then a popup window appears.
4.
Select the desired rule:
•
Right : Detects motions of moving
from the left to the right, over the
virtual line.
•
Left : Detects motions of moving
from the right to the left, over the virtual line.
5.
Click [
oK
].
6.
To remove a defined rule, right click on the displayed virtual line to open popup
context menu and select [
Delete
] button.
`
entering/exiting
1.
Set the type to <
passing, entering/
exiting
>.
2.
Set the event rule to <
Defined area
based rules
>.
3.
On the screen, click four vertices to
define detection area and a popup
window appears.
4.
Select the desired rule:
•
Entering : Detects motions of moving
object whose center point entering
into the defined area, from outside of
the area.
•
Exiting : Detects motions of moving object whose center point exiting from the
defined area, from inside of the area to outside.
5.
Click [
oK
].
6.
To remove a defined rule, right click on the displayed side lines of the area to open
popup context menu and select [
Delete
] button.
English
_101
●
Setup
Screen
