English
_45
●
networ
K connection an
D S
etup
Setting up port range forward for several network cameras
When several network cameras are connected to one Broadband Router device, you
should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.
J
`
If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the
web page of the camera.
•
TCP 943 port is a port for the Silverlight policy server of a camera.
•
You can set a rule of Port Forwarding on the Broadband Router device through its
configuration web page.
•
You cannot change the Silverlight policy server port of a camera.
•
You can change the ports of the camera except the policy server port through its
configuration web pages.
When Camera1 and Camera2 are connected to a router :
M
`
Port forwarding can be done without additional router setup if the router supports the UPnP
(Universal Plug and Play) function.
After connecting the network camera, set <
Quick connect
> of <
Samsung DDNS
> to <
On
> in
the “
Setup
Network
DDNS
” menu.
User
Internet
Broadband Router
Start
End
Protocol
IP Address
943
943
TCP
192.168.1.100
3000
3000
TCP/UDP
192.168.1.100
3001
3001
TCP/UDP
192.168.1.101
4520
4520
TCP/UDP
192.168.1.100
4521
4521
TCP/UDP
192.168.1.101
8080
8080
TCP/UDP
192.168.1.100
8081
8081
TCP/UDP
192.168.1.101
Camera1 (192.168.1.100)
HTTP port
8080
Device port
4520
RTSP port
3000
Policy server port
943
Camera2 (192.168.1.101)
HTTP port
8081
Device port
4521
RTSP port
3001
Policy server port
943
