Samsung iPolis SNV-6084 User Manual Download Page 111

Page: 111 / 148

It may take a max of 20 minutes for the upgrade process.

If you forcibly terminate the upgrade process, upgrade will not be completed properly.

During restarting the system, accessing with web viewer will not be made.

You can download the latest version from the Samsung web site (www.samsungcctv.com).

to back up the current settings
1.

Click [

Backup

The Save As dialog should appear.

Specify the backup path with a proper

file name, and click [

Save

The backup file will be saved to the

specified path in the format of “

.bin

”.

to restore the backup settings
1.

To restore the backup settings, click

[

restore

Select a backup file and click [

open

If you perform the backup or restoration,

the web browser will be closed and the

camera will reboots.

English

_111

●

Setup

Screen

Summary of Contents for iPolis SNV-6084





















































































































































Search results

Summary of Contents for iPolis SNV-6084

Reviews:

Related manuals for iPolis SNV-6084

Brands by name

Popular brands

Samsung iPolis SNV-6084, User Manual

Search results

Summary of Contents for iPolis SNV-6084

Reviews:

Related manuals for iPolis SNV-6084

Brands by name

Popular brands