Samsung iPolis SNV-6084 User Manual Download Page 16

Page: 16 / 148

16_

installation & connection

precautions before installation

Ensure you read out the following instructions before installing the camera:

•

It must be installed on the area (ceiling or wall) that can withstand 5 times the weight

of the camera including the installation bracket.

•

Stuck-in or peeled-off cables can cause damage to the product or a fire.

•

For safety purposes, keep anyone else away from the installation site.

And put aside personal belongings from the site, just in case.

inStaLLation

This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the

external cable is not. You are recommended to install this product below the edge of eaves to

prevent the cable from being externally exposed.

Disassembling

With the provided L-wrench and

drill bit, loosen 3 bolts on the dome

cover counter clockwise to remove

the cover.

VID

AC 24V / DC 12V

+ -

VID

AC 24V / DC 12V

VID

+ -

Bolts

Dome cover

Camera Case

Camera Body

Summary of Contents for iPolis SNV-6084





















































































































































Search results

Summary of Contents for iPolis SNV-6084

Reviews:

Related manuals for iPolis SNV-6084

Brands by name

Popular brands

Samsung iPolis SNV-6084, User Manual

Search results

Summary of Contents for iPolis SNV-6084

Reviews:

Related manuals for iPolis SNV-6084

Brands by name

Popular brands