Samsung HP-P5091 Owner'S Instructions Manual Download Page 75

Page: 75 / 84

Press the MENU button. Press the

▲

▼

button to select “Guide”, then press the ENTER

button.

Press the

▲

▼

button to select the “Default Guide”, then press the ENTER button.

Press the

▲

▼

button to alternate between “Mini Guide” and “Full Guide” and press

the ENTER button.

Viewing the Information about One Channel

Press the MENU button. Press the

▲

▼

button to select “Guide”, then press the ENTER

button.

Press the

▲

▼

button to select the “Mini Guide”, then press the ENTER button.

Viewing the Information about Channels

Press the MENU button. Press the

▲

▼

button to select “Guide”, then press the ENTER

button.

Press the

▲

▼

button to select “Full Guide”, then press the ENTER button.

Use the Green button or Yellow button to activate “-2 Hours”, “+2 Hours” on the bottom.

You may now:
• Jump to a channel directly: Use the Menu Up/Down buttons to highlight the channel number

in the left column and press ENTER.

• Obtain additional program details: Use the Menu Up/Down/Left/Right buttons to highlight

the title of a program and press ENTER.

• Exit from the Program Guide and return to normal viewing mode: Press the Blue button (SRS)

or the EXIT button.

Note

• You can switch to the GUIDE mode quickly by pressing the GUIDE button on the remote control.

Using the EPG (Electronic Program Guide)

Summary of Contents for HP-P5091





















































































Search results

Summary of Contents for HP-P5091

Reviews:

Related manuals for HP-P5091

Brands by name

Popular brands

Samsung HP-P5091, Owner'S Instructions Manual

Search results

Summary of Contents for HP-P5091

Reviews:

Related manuals for HP-P5091

Brands by name

Popular brands