Samsung HP-P5091, Owner'S Instructions Manual

Page: 35 / 84

35
Memorizing the Channels
Your PDP can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and CH
buttons to scan through the channels. This eliminates the need to change channels by entering
the channel digits. There are three steps for memorizing channels: selecting a broadcast
source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the WIRELESS HOME AV CENTER (i.e., an antenna or a cable system).
1
Press the MENU button. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “Select Antenna”,
then press the ENTER button.
3
Press the ▲ or ▼ button to select “Air” or “Cable”,
then press the ENTER button.
4
Press the MENU button to exit.
Select Antenna : Air √
Auto Program √
Add/Delete √
Fine Tune √
Signal Strength √
Channel TV
Move Enter Return
Select Antenna : Cable
Auto Program
Add/Delete
Fine Tune
Signal Strength
Channel TV
Move Enter Return
Air
Cable
Select Antenna : Cable
Auto Program
Add/Delete
Fine Tune
Signal Strength
Channel TV
Move Enter Return
Air
Cable