Samsung HP-P5091 Owner'S Instructions Manual Download Page 36

Page: 36 / 84

Storing Channels in Memory (Automatic Method)

First, select the correct antenna (Air and Cable).
See steps on previous page. Press the MENU button.
Press the

▲

▼

button to select “Channel”,

then press the ENTER button.

Press the

▲

▼

button to select “Auto Program”,

then press the ENTER button.

➤

Quick way to access the Automatic Channel Setting:

Just press the “AUTO PROG.” button on the remote control.

Press the

▲

▼

button to select the correct signal

(Air, STD, HRC, and IRC). Select an option and then
press the ENTER button.

If you are connected to an antenna (Air), leave
“Air” displayed. If you are connected to a cable,
press the

▲

▼

button to display the type of cable

system “STD”, “HRC” or “IRC”. (If you are not sure
which type of cable system you have, contact your
cable company).

Press the ENTER button.
The PDP will begin memorizing all of the available
channels. After all the available channels are stored,
the Auto program menu reappears. Press the MENU
button to stop.

Note

• Auto Program may take a few minutes to process.

Select Antenna

: Air

√

Auto Program

√

Add/Delete

√

Fine Tune

√

Signal Strength

√

Channel

Move

Enter

Return

Select Antenna

: Air

√

Auto Program

√

Add/Delete

√

Fine Tune

√

Signal Strength

√

Channel

Move

Enter

Return

Air

STD

HRC

IRC

Auto Program

Move

Enter

Return

Start

Auto Program

Enter

Return

Air Ch 23

Stop

Auto Program

Enter

Return

It will take about several minutes.

Would you like to continue?

Summary of Contents for HP-P5091





















































































Search results

Summary of Contents for HP-P5091

Reviews:

Related manuals for HP-P5091

Brands by name

Popular brands

Samsung HP-P5091, Owner'S Instructions Manual

Search results

Summary of Contents for HP-P5091

Reviews:

Related manuals for HP-P5091

Brands by name

Popular brands