Samsung HMX-M20BP User Manual Download Page 131

Page: 131 / 144

131

Battery pack

Message

Icon

Informs that...

Action

Low Battery

The battery pack is almost
discharged.

• Replace with a charged battery or connect the AC

power adaptor.

Low Battery Connect AC
adaptor and try again

A function is inoperable due to the
exhausted battery.

• Replace with a charged battery or connect the AC

power adaptor.

Check the authenticity of
this battery

The battery pack can not pass
authenticity check.

• Check whether the battery is authentic and change

to new one.

• It is recommended that only genuine Samsung

batteries are used in this camcorder.

Storage media

Message

Icon

Informs that ...

Action

Insert card

There is no memory card inserted
in the memory card slot.

• Insert a memory card.

Card Full!

There is not enough space to
record on memory card.

• Delete unnecessary ﬁles on the memory card.
• Back-up ﬁles to PC or another storage media and

delete ﬁles.

• Change memory card to another one has enough

free space.

Card Locked

The write protection tab on an SD
or SDHC card has been set to lock.

• Release write protection tab.

Unknown

The memory card cannot be
recognised in cases of Card Error,
Not Formatted or Not Supported
Card.

• Insert the proper memory card that has a supported

ﬁle format.

Card Error

The memory card has some
problem and can not be
recognised.

• Change memory card with another one.

Not Formatted

The memory card is not formatted. • Format the memory card using the menu.

Not Supported Format

The memory card may have been
formatted by another device and
may still have existing images on it.

• The image format is not supported. Check the

supported ﬁle format.

• Format the memory card using menu item.

Not Supported Card

The memory card is not supported
in this camcorder.

• Change the memory card with the one

recommended.

Low Speed Card.
Please record a lower
resolution

The memory card does not have
enough performance to record.

• Record video at a lower quality.
• Change memory card with a one.

warning indicators and messages

WARNING INDICATORS AND MESSAGES

Problems may occur because of the following reasons. Check the information and take corrective action.

Summary of Contents for HMX-M20BP

















































































































































Search results

Summary of Contents for HMX-M20BP

Reviews:

Related manuals for HMX-M20BP

Brands by name

Popular brands

Samsung HMX-M20BP, User Manual

Search results

Summary of Contents for HMX-M20BP

Reviews:

Related manuals for HMX-M20BP

Brands by name

Popular brands