Samsung DVD-V5450, Service Manual

Page: 83 / 288

Operating Instructions
12-34
Samsung Electronics
English
-
39
P
laying
B
ack
Connecting an RCA
Audio/Video Input
Cable
You can connect other audio/video equipment to your
DVD-VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
Examples : • You wish to copy a video cassette with
the help of a second VCR.
• You wish to play back and/or copy
pictures taken with a camcorder
• Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
Connect one end of the RCA video cable into
the
VIDEO
input socket on the front of the
DVD-VCR.
1
Plug the other end of the video cable into the
appropriate output connector on the other
system (VCR or camcorder). 2
Connect one end of the RCA audio cable
supplied into the
AUDIO
input sockets on the
front of the DVD-VCR.
• Take care to respect the colour coding of the
left and right channels.
3
Plug the other end of the audio cable into the
appropriate output connectors on the other
system (VCR, camcorder or Hi-Fi audio system). 4
2
4
3
2
Camcorder VCR
Camcorder Hi-Fi audio system
VCR
When you are ready,
• Start playback or Recording.
• Press the ■ button.
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
œœ
or
√√
button.
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (unless you have deactivated the
Screen Messages mode; refer to page 26 ).
Press the
INFO.
button:
• Once to display the current function,
programme number, recording speed,
date, time and counter
• Twice to display the counter only
• Three times to display the time remaining
on the cassette
• Four times to clear the display
2
Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the beginning
of a sequence:
• Press the
INFO.
button twice to display the
counter
• Press the
CLEAR
button when you want to set
the tape counter to zero
1
Using the Tape
Counter
The tape counter:
• Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
• Is reset when a cassette is inserted in the DVD-VCR
• Allows you to find the beginning of a sequence easily
• If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
0:00:00