Samsung DVD-V5450, Service Manual

Page: 56 / 288

Operating Instructions
12-7
Samsung Electronics
12 -
English
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver
or other equipment into the AV2 (DEC./EXT.)
socket on the rear of the DVD-VCR.
After making this connection, select the
source by pressing the
INPUT SEL.
button for
the
AV2
input sources.
1
By means of RF Coaxial Cable
After making this connection, you must preset
the station received through the satellite
tuner. RF output channel of the satellite
receiver should be adjusted away from
channel
36 , which is used by the DVD-VCR,
e.g. re-adjust to channel 33 .
2
C
onnections
SCART Cable
RF cable
Aerial
1
2
Satellite Receiver or other Equipment
Aerial Connector
TV
Connecting DVD-VCR to a
Satellite Receiver or Other
Equipment
You can connect your DVD-VCR to a Satellite
receiver or other DVD-VCR using the SCART cable if
the appropriate outputs are available on the
equipment chosen. The following illustrations give a
few examples of the connection possibilities.
AV1(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver
or other equipment into the AV1 (EURO AV)
socket on the rear of the DVD-VCR.
After making this connection, select the
source by pressing the
INPUT SEL.
button for
the
AV1
input sources.
1
By means of RF Coaxial Cable
After making this connection, you must preset
the station received through the satellite
tuner. RF output channel of the satellite
receiver should be adjusted away from
channel
36 , which is used by the DVD-VCR,
e.g. re-adjust to channel 33 .
2
SCART Cable
RF cable
Aerial
1
2
Satellite Receiver or other Equipment
Aerial Connector
TV
* DVD-V6500