ENG-21
Connections
ENG-20
C
O N N E C T I O N S
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 62 to 63)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
- DVD-AUDIO only plays back two channel audio through the Digital Audio out.
Multi-channel DVD-Audio discs are output through the Analog outputs.
- SACD plays back only through the Analog outputs. (See pages 62 to 63)
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the
DIGITAL
AUDIO OUT (OPTICAL)
terminal on the rear of the DVD player
to the
DIGITAL AUDIO IN (OPTICAL)
terminal of the Amplifier.
If using a coaxial cable (not included), connect the
DIGITAL
AUDIO OUT (COAXIAL)
terminal on the rear of the DVD player
to the
DIGITAL AUDIO IN (COAXIAL)
terminal of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO
,
COMPONENT
or
HDMI OUT
terminals on the rear of the DVD
player to the
VIDEO, S-VIDEO
,
COMPONENT
,
HDMI
or
DVI IN
terminals of your TV as described on pages 12 to 16.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external
input
in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Optical Cable
(not included)
Coaxial Cable
(not included)
or
Dolby digital or
DTS amp
C
O N N E C T I O N S
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 62 to 63)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Connection to a 5.1CH Analog Amplifier
1
If using audio cables for 5.1 CH Analog Amplifier (not included)
connect the
5.1CH ANALOG AUDIO OUT
terminals on the rear
of the DVD player to the
5.1CH ANALOG AUDIO IN
terminals
of the 5.1CH Analog Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO
,
COMPONENT
or
HDMI OUT
terminals on the rear of the DVD
player to the
VIDEO, S-VIDEO
,
COMPONENT
,
HDMI
or
DVI IN
terminals of your TV as described on pages 12 to 16.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external
input
in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
5.1ch Analog
Amplifier
00633G-HD950-XEL eng1 8/22/05 9~47am Page 20
