Samsung DVD-709 Service Manual Download Page 172

Page: 172 / 179

SPEAKER SETUP (DVD-909
only)

To select the SPEAKER SETUP to

hear surround sound.

Use the UP/DOWN button to
select the desired item. Then
press the ENTER button.

DOLBY DIGITAL OUT

PCM : Converts to PCM (2CH)

48kHz/16Bit audio. Select PCM

when using the Analog Audio

Outputs.

BITSTREAM : Converts to Dolby

Digital BITSTREAM (1CH-5.1CH).

Select BITSTREAM when using

the Digital Audio Output.

MPEG-2 DIGITAL OUT

PCM : Converts to PCM (2CH) of

48kHz/16Bit. Select PCM when

using the Analog Audio Outputs.

BITSTREAM : Converts to

MPEG-2 Audio BITSTREAM

(1CH-7.1CH). Select BITSTREAM

when using the Digital Audio Output.

Note : Be sure to select the correct

Digital Output or no audio

will be heard.

DTS

ON : Outputs DTS BITSTREAM via

digital output only. Select DTS when

connecting to a DTS DECODER.

OFF : Doesn’t output digital signal.

DYNAMIC COMPRESSION

ON : To select dynamic com-

pression.

OFF : To select the standard range.

2X SCAN AUDIO

ON : Turns 2X audio on.

OFF : Turns 2X audio off.

Though 2X SCAN AUDIO is ON in
the SETUP MENU, no sound will be
heard on discs which are recorded
with LPCM, DTS or MPEG-2 AUDIO.

SPEAKER SETUP

Refer to page 37.

Press the SETUP button
when in play or stop mode.

Use the UP/DOWN button to
select AUDIO OPTIONS. Then
press the ENTER button.

Use the UP/DOWN button to
select the desired item. Then
press the ENTER button.

DOLBY DIGITAL OUT/ MPEG-
2 DIGITAL OUT

A digital surround sound format

that is recorded by Dolby

Digital/MPEG-2 Audio. Select the

suitable output signal type of DIGI-

TAL AUDIO OUT/MPEG-2 DIGI-

TAL OUT (Bitstream/PCM) during

playback.

DTS

This program features discrete 5.1

channel sound-track and must be

played through DTS-capable

equipment. When played through

DTS equipment, sound will be

heard from all five system speak-

ers and a subwoofer.

DYNAMIC COMPRESSION

Compresses the dynamic range

(quietest to loudest sound) of a

disc’s soundtrack. This function is

disc-dependent, and may not work

with all DVDs.

2X SCAN AUDIO

Turns audio off or on when a disc

is in 2X playback mode.

etting Up Audio Options

AUDIO OPTIONS

1 DOLBY DIGITAL OUT

PCM

2 MPEG-2 DIGITAL OUT

PCM

3 DTS

OFF

4 DYNAMIC COMPRESSION ON
5 2X SCAN AUDIO

OFF

6 SPEAKER SETUP

909 only

NOTE

• Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby

How to make the SETUP MENU

disappear or return to menu

screen during set up.

Press RETURN button.

DVD-YURO909/709 11/4/95 10:01 AM Page 36

Summary of Contents for DVD-709




















































































































































































Search results

Summary of Contents for DVD-709

Reviews:

Related manuals for DVD-709

Brands by name

Popular brands

Samsung DVD-709, Service Manual

Search results

Summary of Contents for DVD-709

Reviews:

Related manuals for DVD-709

Brands by name

Popular brands