background image

CHANGING

SETUP MENU

S

etting Up the Parental Level

The Parental Level function works in conjunction with DVDs that have been assigned a rating - which helps you
control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.

D

D

D

D

V

V

V

V

D

D

D

D

SETTING THE 

PASSWORD

SETTING THE

PARENTAL LEVEL

35

1.

1.

Press the SETUP button
when in play or stop mode.

2.

2.

Press the UP/DOWN button
to select PARENTAL.

3.

3.

Press the ENTER button
and enter your 4-digit pass-
word by pressing the 0-9
button.

4.

4.

Move to the RATING
LEVEL by using the
UP/DOWN button and
press the ENTER button.

5.

5.

Move to LEVEL 6 by using
the UP/DOWN button and
press the ENTER button.

- The disc which contains LEVEL 7 or

LEVEL 8 will now not play.

Press the SETUP button

when in play or stop mode.

Press the UP/DOWN button

to select PARENTAL.

Press the ENTER button

and enter your 4-digit pass-
word by pressing the 0-9
button.

- ‘7777’ is the original password that

has been encrypted in the player.

Move to CHANGE PASS-

WORD by using the
UP/DOWN button and
press the ENTER button.

Enter the new password.

- After entering the new password, re-

enter it one more times to make sure
the password works.

- The Parental Level function is com-

patible only with parental level
encoded discs.

1.,1

1.,1

2.,2

2.,2

3.,3

3.,3

4.,4

4.,4

5.,5

5.,5

How to make the SETUP MENU 

disappear or return to 

menu screen during set up.

Press RETURN button.

e.g

Setting up in LEVEL 6

PARENTAL CONTROL

1 RATING 

LEVEL

2 CHANGE 

PASSWORD

PARENTAL CONTROL

1 RATING 

LEVEL

2 CHANGE 

PASSWORD

RATING LEVEL

UNLOCK
LOCK LEVEL 8 ADULT

LEVEL 7

LEVEL 6
LEVEL 5
LEVEL 4
LEVEL 3
LEVEL 2
LEVEL 1 KIDS SAFE

NOTE

What if a DVD's rating
exceeds the player's rating
level?

The player alerts you when you
try to play a DVD with a rating
that exceeds the level you've set.
The message, "Your selection
exceeds the rating level for this
player." appears on screen.
Some discs are authored with a
rating override feature included.
When you play a disc with this
feature, the message, “Your
selection exceeds the rating level
for this player. Override the
level?” is displayed. Select
“Override” or “Cancel.” If you
choose to override the rating
level, you will need to enter your
4-digit password to begin play-
back.

DVD-YURO909/709  11/4/95 10:01 AM  Page 35

Summary of Contents for DVD-709




















































































































































































Reviews: