Samsung DVD-709 Service Manual Download Page 150

Page: 150 / 179

Tour of the Remote Control (Cont d)

TV Function Buttons

TV POWER Button

TV/VIDEO Selection Button

CHANNEL UP/DOWN Buttons

VOLUME UP/DOWN Buttons

NOTE

This icon indicates an invalid button press.

If remote doesn’t operate

properly:

Open the battery cover on
the back of the remote.

Insert two AA batteries.
Make sure that the polari-
ties (+ and -) are aligned
correctly.

Replace the battery cover.

• Check the po - of the

batteries (Dry-Cell)

• Check if the batteries are

drained.

• Check if remote sensor is

blocked by obstacles.

• Check if there is any fluores-

cent lighting nearby.

Install Batteries in the Remote

To Connect Headphones (not included) (DVD-909 only)

Turn the headphone volume down to the minimum setting before connecting.
Adjust to your desired volume after connection.

DVD-YURO909/709 11/4/95 9:59 AM Page 14

Summary of Contents for DVD-709




















































































































































































Search results

Summary of Contents for DVD-709

Reviews:

Related manuals for DVD-709

Brands by name

Popular brands

Samsung DVD-709, Service Manual

Search results

Summary of Contents for DVD-709

Reviews:

Related manuals for DVD-709

Brands by name

Popular brands