English
_9
●
CONNECTIONS
connections
The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
- Refer to the user’s manual of the additional components you are connecting for more information on those
particular components.
Connecting to a TV (VIDEO CVBS)
1
Using video/audio cables, connect the
VIDEO
(yellow)/
AUDIO (red and white) OUT
terminals on the rear of the
DVD player to the
VIDEO (yellow)/AUDIO (red and white)
IN
terminals of TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until
the Video signal from the DVD player appears on the TV
screen.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)
- The number and position of terminals can vary depending on your TV set. Please refer to the user's
manual of the TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
DVD player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (I-SCAN
➝
P-SCAN
➝
SCART-RGB
➝
SCART-CVBS)
RED
WHITE
YELLOW
RED
WHITE
YELLOW
Audio
Cable
Video Cable
Choosing a Connection
Summary of Contents for DVD-1080P9
