Samsung DP505A2G-K01AU User Manual Download

Page: 57 / 143

Chapter 3.

Using the computer

Try to run a function referring to the figure of the gesture below.

Gestures

Hand Motions

Operating descriptions

Move to the

Left or Right

Move the palm to the left /

Move the palm to the right

Previous screen / Next screen

Fist

Fist

Click

Rotate

Rotate the palm counter

clockwise / Rotate the palm

clockwise

Turn the volume down / Turn the volume up

Wave

Wave the palm 2~3 times

Exit the program

Make a fist and

move it up

Make a fist and move it up

(To the height of the camera)

Move to the start screen.

Start Screen Mode:

Move to the most recently

executed application.

Depending on the program version, some features may be changed or may not be supported without prior notice.

Using hand gestures

(Optional)

Summary of Contents for DP505A2G-K01AU
















































































































































Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands

Samsung DP505A2G-K01AU, User Manual

Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands