Samsung DP505A2G-K01AU User Manual Download

Page: 81 / 143

Chapter 3.

Using the computer

Installing the TPM program

You can install the TPM program as follows. Install the program

according to the procedures below.

This program is only provided for models with Recovery and

the TPM function.

Method 1

Run

Recovery

and click on

System Software

- If your computer does not boot up or if

System Software

does not display in the

Recovery

program, use

Method 2

to install the TPM program.

Click on

System Software

Installation.

The

SW Update

program will be launched.

Select

TPM Host SW

and click

Install Now

If the system software media is supplied with the product,

you can install the program by using the system software

media (only when supplied.)

After the installation, if you click

, the computer restarts.

Method 2

Turn the computer on and immediately press the

key

several times.

After a moment, the

Recovery

program runs.

Click

System Software

When a pop-up window appears to ask you to reboot the

system, click

Yes

The system starts to reboot. After a moment, the

SW Update

program automatically runs.

Connect to the network.

Select

TPM Host SW

and click

Install

After the program is completely installed, click

Close

Close the

SW Update

window and reboot your computer

again.

Using the TPM Security Device

(Optional)

Summary of Contents for DP505A2G-K01AU
















































































































































Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands

Samsung DP505A2G-K01AU, User Manual

Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands