Samsung DP505A2G-K01AU User Manual Download

Page: 68 / 143

Chapter 3.

Using the computer

A wireless network (Wireless LAN) environment is a network

environment that enables communication between multiple

computers at home or a small-size office through wireless LAN

devices.

The screen figures and terms may differ depending on the

•

model.
Depending on the program version, some functions may

•

not be provided or different functions may be provided.
The descriptions below are for computer models with

•

a Wireless LAN card or device. A Wireless LAN device is

optional.

The pictures in this manual may differ from the actual

product depending on your wireless LAN device model.

What is an Access Point (AP)?

An AP is a network device that bridges wired and wireless

LANs, and corresponds to a wireless hub in a wired network.

You can connect multiple wireless LAN installed computers

to an AP.

Wireless Network

(Optional)

Summary of Contents for DP505A2G-K01AU
















































































































































Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands

Samsung DP505A2G-K01AU, User Manual

Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands