Samsung DP505A2G-K01AU User Manual Download Page 70

Page: 70 / 143

Chapter 3.

Using the computer

Using the TV

(Optional)

Products embedded with a TV tuner card (Optional) can use the

TV function.
After connecting to the antenna, you can watch TV by using the

corresponding TV program.

You can only use the TV function when the

TV tuner card

(Optional) is installed.

Connecting the TV Antenna

You must connect the

TV tuner card

(Optional) to the

antenna

. Connect the

antenna cable

to the

TV antenna input

port

Configuring the TV

The screenshots and terms used in the user manual may

•

differ from the actual ones.
The screen and menu titles of the TV program (ArcSoft TV)

•

may differ depending on the version.

Click

Start Screen

> TV programs (TV ArcSoft).

You will see the video device section window. Select one

from the following options.

Digital Tuner

Analog Tuner

Select All

(Scanning for all channels may take some time.

If you are not sure what to select, just select ‘Select All’)

Summary of Contents for DP505A2G-K01AU
















































































































































Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Samsung DP505A2G-K01AU, User Manual, Page: 70 / 143

Search results

Summary of Contents for DP505A2G-K01AU

Reviews: