Samsung DP505A2G-K01AU User Manual Download

Page: 39 / 143

Chapter 2

Using Windows 8

Using a Touch Screen

(Touch screen models only)

A touch screens allows you to use your computer without a keyboard or mouse.
The touch screen instructions also describe the functions which can be activated via the touch screen.

If you are using your computer for a long period of time, it is recommended using a keyboard and mouse.

•

Make sure to operate your touch screen using your finger. If you operate your touch screen with a hard object, it will not work.

•

If there any foreign substances such as insects or water on the touch screen, your touch screen will not work properly.

•

Using a Touch Screening

This function is supported by Windows 8 touch screen models and is activated by some applications.

•

In addition, please note that supported functions may differ depending on the application.

•

Learning about Basic Touch Screen Operations

The touch screen interface is supported in Windows 8.
You can easily learn how to use the touch screen conveniently.

Touch Operation

Function Description

Dragging from the right edge

toward the center

Displays the Charms menu which is hidden at the right of the screen.

Summary of Contents for DP505A2G-K01AU
















































































































































Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands

Samsung DP505A2G-K01AU, User Manual

Search results

Summary of Contents for DP505A2G-K01AU

Reviews:

Related manuals for DP505A2G-K01AU

Brands by name

Popular brands