manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Service Manual

Share
Download
Samsung CLP 510N - Color Laser Printer Service Manual Download Page 36

5

5

5-1

Samsung Electronics

System Outline

Service Manual

5 System Outline

This chapter describes the functions and operating principals of the main components.

5.1 CLP (Color Laser Printing) Process

5.1.1 OPC Drum Unit (Charge Section)

The OPC Unit is the image formation unit and it consists of the OPC drum, waster toner assembly, charge
roller assembly, etc. (see diagram below).

LSU

Eraser Lamp

Charge Bias

Waste Toner Tank

Cleaning Roller

Cleaning Blade

Charge Roller

OPC Drum

-1000V ~ -1500V

Charge Roller

HVPS

1) Structure

* OPC drum: The laser light coming from the LSU forms an latent electric image on the surface of

the OPC drum.

* Cleaning Blade: Removes remaining unwanted toner from the OPC drum.
* Waste toner tank: Collects and stores the waste toner.
* Charge roller: The charge roller is charged to a negative high voltage (-1KV~1.5KV) It is in con-

tact with the OPC drum and produces a uniform (-) voltage on its surface of approximately -500~-
800V.

2) Type

* Life span: 50K Images (Color 12.5K)
* Waste toner removal: Transferred to a user replaceable tank
* Waste tank sensors: LED type, detects tank present and tank full
* OPC drum diameter: 120mm
* Power: Main motor (BLDC)
* Charging method: Charge roller
* Eraser method: LED lamp (+5V/2Pin)
* PTL: LED lamp (+5V/2Pin)

Summary of Contents for CLP 510N - Color Laser Printer





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands