manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Service Manual

Share
Download
Samsung CLP 510N - Color Laser Printer Service Manual Download Page 139

8-16

Troubleshooting

Samsung Electronics

Service Manual

8.4.7. Can not sense when the Cover is Opened.

Symptoms

LCD Indicates "Ready" even when cover is opened.

Check and Cause

Solution

1. Check if the Hook Lever inside the Duplex Cover is

broken or distorted. 

2. Check the Cover Open sensor, connectors and cable

harness. Ensure that a signal reaches the main PBA

3. Use the EDC mode to test the actuator.

1. Replace the Duplex Cover.

2. Replace the harness or microswitch as necessary.

3. Replace the Sensor Board.

8.4.8 Defective Motor

Symptoms

Main Motor does not work and paper does not feed when printing. Jam 0 is displayed.

Check and Cause

Solution

1. Check if the Motor Harness or Motor PCB is broken

or not.

2. Test the Motor using EDC Mode.

1. Replace the Motor or Motor Harness.

2. Replace the Main PBA.

8.4.9 No Power

Symptoms

Power is not supplied to the set, or the LCD display is not on.

Check and Cause

Solution

1. Check the power supply input and DC voltage output

from the SMPS. Check the fuses in the SMPS.
Check the wall socket. 

2. If the SMPS supply is OK, and the LCD still does not

work check the display connectors and cable harness 

3. Check if +24VDC or other Power Supplies are shorted

out.

1. Replace the Power Cable. Replace SMPS fuses. If

the fault recurs replace the SMPS.

2. Replace cables or LCD Panel Ass'y. Replace the

Main PBA.

3. Replace the components used for +24VDC.

Summary of Contents for CLP 510N - Color Laser Printer





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands