manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Service Manual

Share
Download
Samsung CLP 510N - Color Laser Printer Service Manual Download Page 128

8-5

Samsung Electronics

Troubleshooting

Service Manual

8.2 Solution of Image Problem

Cause

Sequence of Treatment

Driver Installation Problem.

Toner cartridge contacts dirty or not making
good contact or empty Toner Cartridge
(when printing a single color image)

ITB cartridge contacts dirty or not making
good contact or Faulty ITB unit

LSU cable harness plugs not fitted properly
or faulty LSU.

Toner transfer problem

Try printing a Demo Page.
Check that the operating system driver was
installed correctly.

Check and clean the toner contacts.
Re-seat the Toner Cartridge.
Replace the Toner cartridge

Check and clean the ITB contacts.
Re-seat the ITB Unit.
Replace ITB Unit

Check the connectors on the LSU Unit and
main PWA are properly inserted.
Replace the LSU Unit, cables or MAIN PWA
as required

Check all HV contacts and cables.
Replace the HVPS.

- No Image

Cause

Sequence of Treatment

OPC Drum BIAS contacts dirty or not mak-
ing good contact.

Charge Voltage of the OPC Drum is unstable.

Clean Drum contacts..
Replace the OPC Drum.

Replace the HVPS Board.

- Completely Black Image

Cause

Sequence of Treatment

Contamination of the internal mechanism of the
toner cartridge

OPC Drum surface contaminated or damaged.

ITB Unit belt is contaminated or damaged.

Fuser Unit is contaminated.

Replace the Toner Cartridge.

Replace the OPC Drum.

Replace the ITB Unit Belt.

Clean or replace the Fuser Unit.

- White Spots / Black Spots / Colored Spots

Summary of Contents for CLP 510N - Color Laser Printer





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands