manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Service Manual

Share
Download
Samsung CLP 510N - Color Laser Printer Service Manual Download Page 137

8-14

Troubleshooting

Samsung Electronics

Service Manual

8.4.1 Fuser Error

8.4 Symptoms of Bad Operation and Troubleshooting.

Symptoms

Open Fuser / Over Heat / Low Heat displayed on the LCD Panel.

Check and Cause

Solution

1. Check the continuity of the Thermostat, AC Wire and

Heat Lamp.

2. Check the continuity of the Thermistor and thermistor

harness / contacts.

3. Test the Heat Lamps and the overheat circuitry.

4. Check the fuser for any evidence of damage due to

overheating or melting.

1. Replace the whole Fuser assembly if the Thermostat

is open circuit, otherwise replace heat lamps as
required..

2. Replace broken thermistor or cables as necessary. 

3. Replace the main PBA id the overheat circuit is faulty..

4. Replace the Fuser.

8.4.2 LSU Error

Symptoms

Engine LSU Error displayed on the LCD Panel.

Check and Cause

Solution

1. Check the LSU Connector.

2. Check the LSU Motor.

3. Check the HSYNC signal.

4. Check the Deve Cover Micro switch.

1. Replace the LSU.

2. If the same error recurs replace the main PBA.

8.4.3 Fuser does not work due to the drive gear melting.

Symptoms

The fuser gears melt and the roller drive fails.

Check and Cause

Solution

1. The Fuser makes a noise and fails to operate, rollers

may not rotate.

- Replace the Fuser.
- Replace the Main PBA.
- Replace the SMPS.

Summary of Contents for CLP 510N - Color Laser Printer





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands