manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Service Manual

Share
Download
Samsung CLP 510N - Color Laser Printer Service Manual Download Page 140

8-17

Samsung Electronics

Troubleshooting

Service Manual

8.4.10 Curved or Distorted Vertical Lines

Symptoms

Curved, wavy or distorted vertical lines.

Check and Cause

Solution

1. Use EDC Mode to test the LSU. Check that the

+24VCD signal between the main PBA and the LSU
is stable 

2. Check that the LSU clock is stable. 

1. Replace the LSU or Main PBA.

2. Replace the Main PBA.

8.4.11 Low Toner

Symptoms

"Ready Replace [Color]" is displayed on the LCD Panel.

Check and Cause

Solution

1. "Low Toner" is displayed when under 500page or

less toner remains (in any of the cartridges).

2. Check the condition of the contacts on the DEVE

PBA.

1. Using the keypad check which toner is empty and
replace the Toner Cartridge.

- Replace the Toner Joint PBA.
- Replace the Main PBA.

8.4.12 Replace Toner[CART].

Symptoms

LCD displays "Ready Replace [CART]".

Check and Cause

Solution

1. “Ready Replace CART” is displayed when the OPC

Image Count value is over 50,000. Image Density
may be reduced. It is possible to continue to print one
Page at a time by pressing the “On-Line” button when
it flashes.

1. Replace the OPC Drum.

Summary of Contents for CLP 510N - Color Laser Printer





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands