manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Service Manual

Share
Download
Samsung CLP 510N - Color Laser Printer Service Manual Download Page 104

7-7

Samsung Electronics

Alignment & Adjustments

Service Manual

7.2.6 Jam In Exit Area : Jam2

If paper is jammed in the paper exit area 'Jam In Exit Area ' appears on the display.

1. If a long portion of the paper is visible pull it

straight out. If not continue to step 2.

2. Using the handle open the left cover completely.

3. Press the top cover release button to unlatch

the top cover and open it all the way.

4. Carefully take the jammed paper out of the

printer.

5. Close the top cover and the left cover firmly

6. Open and close the right cover to resume printing.

CAUTION : If the left cover is not completely

open the top cover release button
will not press.

Fuser

CAUTION : Do not touch the fuser it is hot and

could cause burns! The fuser's 
operating temperature is 180 °C 
(356 °F). Take care when removing
paper from the machine.

CAUTION : Do not try to close the top cover with

the left cover closed. This may cause
damage to the machine.

Summary of Contents for CLP 510N - Color Laser Printer





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands