Samsung CFTD2083TX/SMS, Service Manual

Page: 18 / 102

Disassembly and Reassembly
3-8 Samsung Electronics
3-3-4 Lever FL Arm Ass’y Removal
1) Push the hole “A” in the direction of arrow “B”
use the pin.(about Dia. 2.5)
2) Pull out the Lever FL Arm Ass'y
Œ
from the
Boss of Main Base.
3) Remove the Lever FL Arm Ass'y
Œ
in the
direction of arrow “C”.
Œ
GEAR FL CAM
GEAR WORM WHEEL
POST
TIMING POINT
Fig. 3-7 Gear FL Cam, Gear Worm
3-3-3 Slider FL Drive, Gear FL Cam Removal
1) Pull the Slider FL Drive
Œ
to the front direc -
tion.
2) Remove the Slider FL Drive
Œ
in the direction
of arrow. (Refer to Fig. 3-6)
3) Remove the Gear FL cam
´
.
Note : When reinstalling be sure to reassemble
Slider FL drive
Œ
after you insert the Boss of
Lever FL ARM-R in Groove of Slider Fl drive
Œ
.
Assembly : Align the Gear FL Cam
Œ
with the
Gear worm wheel Post as shown drawing.
(Refer to Timing point)
Œ
SLIDER FL DRIVE
´
GEAR FL CAM
Fig. 3-6 Slider FL Drive Removal
Œ
LEVER FL ARM ASS`Y
"C"
"B"
PIN
HOLE "A"
Fig. 3-8 Lever FL Arm Ass’y Removal