Call Functions 47
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold
: place the current active call on hold.
•
Unhold
: Take the current active call off of hold.
•
Add call
: displays the dialer so you can call another person.
•
Keypad
: displays the on-screen keypad, where you can
enter number using DTMF (Dual Tone Multi-Frequency).
•
End call
: terminates the call.
•
Speaker
: routes the phone’s audio through either the speaker or
through the earpiece.
–
Tap
Speaker
to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.
–
Tap
Speaker
again
to use the phone’s earpiece (see
“Using
the Speakerphone During an Active Call”
on page 49). The
green line will turn gray when Speaker is not activated.
•
Mute
:
turn the onboard microphone either on or off.
–
Tap
Mute
during a call to mute the microphone. A green line
will appear under the Mute button.
–
Tap
Mute
again to unmute the microphone. The green line will
turn gray when Mute is not activated.
•
Headset
connects to a Bluetooth headset.
–
Tap
Headset
during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
–
Tap
Headset
again to de-activate the Bluetooth headset. The
green line will turn gray when the Headset is not activated.
•
Press
for more options:
–
Contacts
: allows you to go to your Contact list.
–
Memo
: allows you to jot down a memo during a call.
–
Noise suppression on/off
: allows you to turn on the Noise
suppression feature when you are in a noisy area. Turn it off
when not needed to conserve battery power.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1.
While on a call, tap
Hold
. This action places the
current caller on hold (which is displayed on-screen as
a grayed-out box).
2.
You can later reactivate this call by tapping
Unhold
.
To make a new call while you have a call in progress
1.
Tap
Hold
.
2.
Tap
Add call
to display the dialer.
