Samsung AM050FNKDEH, User & Installation Manual

Page: 61 / 78

61
Setting an indoor unit address (MAIN/RMC)
1. The receiver module of a wireless remote controller is at PBA phase.
(This receiver module is only for setting the option , not for operating the ERV+.)
You can set or check the MAIN or RMC address with the main menu 4 of a wired remote controller.
2. Main Address
t
You may not need to set main address if you select auto address setting from the outdoor unit.
t You can set the Main address from “00” to “79”. If an address above 80 is entered, it will be ignored.
t
The Main addresses are different each other.
3. RMC Address
t
You don’t have to set the RMC address when not using the centralized controller.
t You can set the Main address from “0” to “F”.
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE Setting Main address
100-digit of indoor
unit address
10-digit of indoor unit
The unit digit of an
indoor unit
Remote
Controller
Display
Indication and
Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 A
0
No Main
address
0~9 100 -digit 0~9 10 -digit 0~9 A unit digit
1
Main
address
setting
mode
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE
RESERVED
Setting RMC address
RESERVED
Group channel(*16) Group address
Remote
Controller
Display
Indication and
Details
Indication Details Indication Details Indication Details Indication Details
1
0
No RMC
address
RMC1 0~F RMC2 0~F
1
RMC
address
setting
mode
t
When “A”~”F” is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.
t If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input
the option value of SEG5~6.
t If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the
option value of SEG11~12.
t You cannot set SEG11 and SEG12 as F value at the same time.
CAUTION
ENGLISH