55
Indoor unit setting
Power and communication cable connection
Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
Basic sepcification of display
e.g.
SEG1: Displays “U” when an indoor unit communicates with a wired remote controller.
SEG2: Displays a digit of RMC address.(0~F)
SEG3/SEG4: Displays two digits of main address.
In case of initial status, U0 00 will be displayed as the example above.
(Communication with a remote controller: On, RMC address: “0”, MAIN address : “00”)
NOTE
t
The contents above will be displayed with error, trial operation/VIEW mode and RESET.
t
The “U” display which means whether the communication of a wired remote controller for SEG1 is on or
not may be delayed for 2-3 minutes due to the time difference in communication.
ENGLISH
