68
Using the PCB Switch
Setting key function (AM
✴✴✴
CNBF
✴✴
Model only)
1 . Press and hold K2 to enter the option setting . (Only available when the operation is stopped)
- If you enter the option setting, display will show the following . (If you have set the 'Emergency operation for
compressor malfunction', 1 or 2 will be displayed on Seg 4 .)
- Seg 1 and Seg 2 will display the number for selected option .
- Seg 3 and Seg 4 will display the number for set value of the selected option .
2 . If you have entered option setting, you can shortly press the K1 switch to adjust the value of the Seg 1, Seg 2 and select
the desired option .
Example)
3 . If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and change
the function for the selected option .
Example)
4 . After selecting the function for options, press and hold the K2 switch for 2 seconds . Edited value of the option will be
saved when entire segments blinks and tracking mode begins .
• Edited option will not be saved if you do not end the option setting as explained in above instruction .
CAUTION
DB68-12327A-00_IM_DVM Hydro HT_AA_EN_.indd 68
DB68-12327A-00_IM_DVM Hydro HT_AA_EN_.indd 68
2023-06-15 오전 10:37:40
2023-06-15 오전 10:37:40
