background image

4

English

Saf
ety
 Inf
or

mation

General

•  All materials supplied in this manual are indispensable for the 

safety of the equipment. 

Users shall establish appropriate safety and health practices 

and determine the applicability of regulatory limitations based 

on the following descriptions before use.

•  This unit contains a high flammable refrigerant, R-290.  

There are fires and explosions when refrigerant leaks.  

Be sure to follow the storage, installation, maintenance 

instructions.  

(Please refer to the reference guide for details.)

•  Always disconnect the air to water heat pump from the power 

supply before servicing it or accessing its internal components.

•  Verify that installation and testing operations are performed 

by qualified personnel.

•  Verify that the air to water heat pump is not installed in an 

easily accessible area (vandalism/ sabotage/ other harmful 

activities).

•  Carefully read the content of this manual before installing the 

air to water heat pump and store the manual in a safe place in 

order to be able to use it as a reference after the installation.

•  For maximum safety, installers shall always carefully read the 

following warnings.

•  Store the user and installation manual in a safe location and 

remember to hand it over to the new owner if the air to water 

heat pump is sold or transferred of ownership.

•  This manual explains how to install an outdoor unit and 

connecting it to the indoor part (hydro unit or control kit).  

Use of other types of devices with the control system may 

damage the device and void the warranty. 

•  The manufacturer shall not be responsible for damages arising 

from noncompliant units or parts.

•  The manufacturer shall not be responsible for damage 

originating from unauthorized changes or the improper 

connection of electric and hydraulic lines. Failure to comply 

with these instructions or to comply with the requirements 

outlined in the "Operating limits" table included in the manual 

shall immediately invalidate the warranty.

•  To prevent serious system damage and user injuries, 

precautions and other notices shall be observed.

•  Failure to comply with these instructions or to comply with 

the requirement on the Operating Range (Heat: -25~35 °C/ 

DHW: -25~43 ℃/ Cool: 10~46 °C) outlined in the Product 

Specification shall immediately invalidate the warranty.

•  Do not use the units if you see some damages on the units and 

recognize something problematic such as loud noise or  

smell of burning.

•  To prevent electric shocks, fires or injuries, always stop the 

unit, ultimately rendering the product powerless. Contact 

Samsung’s technical support if the unit produces smoke, if the 

power cable is hot or damaged or if the unit is very noisy.

•  Always remember to inspect the unit, electric connections, 

refrigerant pipework and protections regularly.  

These operations shall be performed by qualified personnel 

only.

•  The unit contains moving and electrical parts, which should 

always be kept out of the reach of children.

•  Do not attempt to repair, move, alter or reinstall the unit by 

unauthorized personnel. These operations may cause product 

damage, electric shocks, and fires.

•  Do not place containers with liquids or other objects on the 

unit. Never sit or stand on the product.

•  All the materials used for the manufacturing and packaging of 

the air to water heat pump are recyclable.

•  The packing material and exhausted batteries of the remote 

controller(optional) must be disposed of in accordance with 

local regulations.

•  Always make sure that the power supply is compliant with 

local safety standards.

•  For use in Europe: This appliance can be used by children aged 

8 years and above and persons with reduced physical, sensory 

or mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning the 

use of the appliance in a safe way and understand the hazards 

involved. Children shall not play with the appliance. Cleaning 

and user maintenance shall not be done by children without 

supervision.

•  This appliance is not intended for use by persons (including 

children) with reduced physical, sensory, or mental capabilities, 

or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning the appliance use 

by a person responsible for their safety. Children should be 

supervised to ensure they do not play with the appliance.

•  Be sure not to perform power cable modification, extension 

wiring, and multiple wire connection.

 

– It may cause electric shock or fire due to poor connection, 

poor insulation, or current limit exceedance.

•  Do not use means to accelerate the defrosting operation or to 

clean, other than those recommended by Samsung.

•  Do not pierce or burn.
•  Be aware that refrigerants may not contain an odour.
•  Determine the installation location regarding the conditions 

cited in this reference guide and obtain the user’s approval.

•  The outdoor unit must not be placed on its side or upside 

down, as the compressor lubrication oil will run into the 

cooling circuit and seriously damage the unit.

•  Combine R-290 products only or an error signal appears and 

the products will not operate. Check with the compatibility 

table provided by Samsung.

•  Make sure to safely dispose of packing materials. Packing 

materials, such as nails and other metal or wooden pallets may 

cause injuries to humans and animals by unsafe disposal.

Installing the unit

  NOTE

•  When installing the unit, remember to firstly connect 

the water pipework, then the electrical lines. Always 

disassemble the electric lines before the water pipework.

•  Upon receipt, inspect the product to verify that it has not been 

damaged during transport. If the product appears damaged, do not 

install it, as the refrigerant may leak. A leaking product should be 

moved to a safe outdoor place. There should be no ignition source 

within 6 meters. Products should be located where the refrigerant 

can be safely removed or professionally removed and discarded by 

service technicians. Immediately report the damage to the supplier 

of the Samsung products (distributor/retailer/ local Samsung branch 

office)

•  After completing the installation, always carry out a functional 

test (commissioning, including reporting) and provide instructions 

on how to operate the air to water heat pump to the user.

•  Do not use the air to water heat pump in environments with 

hazardous substances or close to equipment that releases 

open flames to avoid the occurrence of fires, explosions or 

injuries.

•  While in installation or relocation of the product, do not mix 

Safety Information

Safety Information

Summary of Contents for AE CXYD Series































Reviews: