Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display User Manual Download

Page: 66 / 149

This menu shows a list of display devices which have following errors - fan error, temperature

error, brightness sensor error, or lamp error.

Select a display device from the list. The

Repair

button will be enabled. Click the refresh button

to refresh the error status of the display device. The recovered display device will disappear

from the

Fault Device List

Fault Device Alert

Display device in which error is detected will be reported by email.

Fill in all required fields. The

Test

and

buttons will be enabled. Ensure the

Sender

information and at least one

Recipient

are entered.

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands