Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display Page 123 User Manual Download

Page: 123 / 149

• It is recommended that the playback interval between two BMP images in the slide-

show should be one second. The image extraction probability will decrease with other

playback intervals.

• A BMP image might not be extracted if it is covered by another image (for example,

the mouse pointer).

3. If a more recent version than the current software version is detected, you will be asked

whether to upgrade the current software. If you select <

Yes

>, the upgrade is performed.

4. When the software upgrade is completed, the product is turned off and on automatically.

Note

• This only operates with a digital signal, such as in

DVI

HDMI1

, or

HDMI2

mode. (The

input resolution must be identical to the panel resolution.)

• In

HDMI1

and

HDMI2

modes, the timing values used for both the PC and TV are only

supported if the

Edit Name

is set to

DVI PC

• This is only supported if the

Size

is set to

16:9

Setup Reset

Reset all the values for a setting.

Reset All

Reset all the settings for the display.

Multi Control

Available Modes

•

DVI

DisplayPort

•

Component

•

HDMI

Adjusting the LCD Display

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 400UX - SyncMaster - 40" LCD Flat Panel Display

Reviews:

Related manuals for 400UX - SyncMaster - 40" LCD Flat Panel Display

Brands by name

Popular brands